Craftlander Boat Lift Electric Winch Page

We offer different types of electric winches

Always use ground faults at shore when running 110 volt out to any device.

.

Shown above is our 10PWC with a rubber wheel drive attached to it. The rubber wheel drive is a universal drive that can be attached to all Craftlander Boat Lifts. Advantage to this style of drive is that the bungee cord can be taken off and motor swung out of the way to use the boat lift wheel manually.Use ground fault before running 110 volt cable out to unit.

Above is what we call a direct drive winch. The boat lift wheel is taken off the boat lift and the motor hooks directly on the winch. Having the wheel off might be a advantage for you. If there is a problem with the unit or lack of electricity there is a place for a cordless drill or handle to let the hoist down or up. Units are available in 12 volt and 110 volt and come in a turn-key or remote format. The remote control units come with (1) remote key fob. Use ground fault before running 110 volt cable out to unit.

8,000 lb boat lift (shown on left and right) with worm gear drive. Only available in 110 and 220 volt. An advantage to this hoist is not using existing manual winch on lift. This reduces the cost of the hoist. The big disadvantage to this is that they need a lot of power to operate and good size wire run out to unit from shore. Use ground fault before running 110 or 220 volt cable out to unit.